2.5 SATAIII M3 SLC INDUSTRIAL SSD

TengYee M3 series SSD is a high capacity SSD solution delivers extremely high performance up to 550MB/S read and 500MB/S write through the SATAIII 6.0Gbps interface. The M3 is ideal for a variety of applications, including enterprise solutions where data throughput needs to be high, as well as industrial and military installations where the potential for high shock and vibration conditions exist. With adopting SLC/ MLC NAND flash technology, and utilizing a unique firmware architecture, the M3 maximizes the bandwidth limitations of SATA III providing up to 75,000 input/output operations per second( IOPS).

Get Quotes

work temperature

Basic Information
Standard Serial ATA
SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor
2.5-inch (100.0mm x 70.0mm x 9.5mm/7.0mm) L×W×H
Connector
7+15 pin
Capacities
256GB~4TB
Input Voltage
5V (±5%)
Type
Industrial SSD
Performance
Max Sequential Data Read/Write
530/535MB/s
Access Time
<0.1ms
MTBF
>2,000,000 hours @25c
Memory Management
Flash Management Algorithm
Static and dynamic wear-leveling, bad block management algorithm
Dynamic Power Management and SMART
Capacities
256GB, 512GB, 1TB,2TB,4TB
NAND Configuration
SLC Mode
Intelligent features
Built-in ECC
On-Chip Adaptive RAID data rebuild protection
Optional
Read only mode when not enough reserved space
Optional
Dedicated Power Interrupt Data Protection
Optional
Power Failure Protection
Secure Erase
Optional
Environment
Temperaure
Operation: -40°C to +85°C; Storage: -50°C to +95°C
Humidity
5-95%
Vibration
10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock
Peak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)